VERTICUT Double Column Bandsaws
Photo of the 700SA
Photo of the huge 800SA
Click to Request this Quote: Verticut 360SA: cuts 19" wide x 14" high
Click to Request this Quote: Verticut 475SA: cuts 25" wide x 18" high
Click to Request this Quote: Verticut 600SA: cuts 28" wide x 24" high
Click to Request this Quote: Verticut 700SA: cuts 28" wide x 27.5" high
Click to Request this Quote: Verticut 800SA: cuts 32" wide x 32" high
Features
- Dual post saw design for straighter cuts as head descends
- Linear bearings for maximum saw head stability
- Cutting feed rate hydraulically controlled
- Load sensing valve stops the feed if the blade starts to overload, such as when cutting the web of structural shapes
- Saw up travel can be set to minimize distance between the blade and the top of the material
- Saw down travel can be set to allow notching of blocks
- Manual saw control, saw up, saw down, saw cut
- Semi-automatic cut cycle
- Miter cuts up to 45 degrees by swiveling vise on most models
- Heavy duty cast iron gear box designed for band sawing machines, with precision machined worm, phosphorous bronze worm gear, taper roller bearings and oil bath lubrication
- All ball bearings are totally enclosed and lubricated for life
- Blade guides are carbide faced with rollers to remove blade twist and dampen
- Vibration flood coolant system to both saw guides
- Adjustable material stop for repetitive cutting
- Bimetal blade
- CSA approved electrics. 220 V or 440 V or 575 volts, 3 phase
- Need special features? We can customize these machines.
- High Quality made in Canada.
VERTICUT Dual Direction Motering Band Saw 400M2
MACHINE SPECIFICATIONS:
- Swivel head can rotate, so this machine is great for miter cutting.
- The head can rotate 45° forward and 60° back.
- Hydraulic Vice for quick easy clamping.
- Cuts Round at 90 degrees: 16" (400 mm)
- Cuts Rectangular at 45°: 15" (380 mm)
- Cuts Rectangular at 60°: 10-1/2" (265 mm)
- Cuts Rectangular at 90°: 21"W x 12-3/4"H (530x400 mm)
- Cuts Rectangular at 45°: 15"W x 10-1/2"H (380x320 mm)
- Cuts Square at 60°: 10-1/2" W x 10-1/2"H (365x365 mm)
- Cuts Rectangular at 60°: 7-3/4"W x 16"H (195x400 mm)
- Blade Speeds - variable: 60 to 400 feet/min
- (18 to 122 m/min
- Table Height: 30-1/2" (775 mm)
- Maximum Work Load: 3000 Lbs.(1350 kg)
- Machine Weight: 2150 Lbs.(980 kg)
- Blade Size 1" (34mm) wide
- Blade Drive: 5 Hp (3.75 kW)
- Hydraulic System: 2 Hp (1.5 kW)
- Voltages available 3 phase: 208, 230, 460 or 575 V
- High Quality made in Canada
Click to Request a Quote for the Verticut 400M2
OPTIONS AVAILABLE:
- Laser Light Cutting Line Indicator
- Work Light
- 10 feet Roller Conveyor
- Overseas Shipping Crate
American made WF WELLS Dual Column Bandsaws (many sizes in stock)
WF Wells Double Column model W-9
STANDARD FEATURES:
- Made in USA by WF Wells
- Normally in stock
- Semi-Automatic
- 1" Bi-Metal, High Production Blade
- Carbide Blade Guides with Back-Up Rollers
- Manually Controlled Vise.
- Manually Controlled Blade Tension
- 45° Swiveling Vise
- Built-in Coolant System
- Console Controlled Blade Speed
- Blade Powered Cleaning Brush
- Automatic End-of-Cut Shut Down
- Quick and Easy Blade Speed Change
- Blade Speed and Work Selector Chart
- Feed Pressure Monitor/Regulator
- TEFC Motor
- Low Voltage and Overload Protection
- Fused Disconnect
- Electrical to NFPA-79 Standards
- Safety Guards, Owners Manual
- Hydraulic oil included
MACHINE SPECIFICATIONS:
- Capacity @ 90°:
- Rectangular 18" wide x 9" high, Round 9"
- Piece Part Weight Capacity: 2000 Lbs.
- Blade Speed Range: 70-380 SFPM
- Blade size: 1" x 11’6"
- Bandwheel Size: 14½"
- Sawing Force: 30 to 120 Lbs
- Saw Frame to Raise: 16" in 18 Seconds
- Cycle Time to Lower: 16" in 12 Seconds
- Blade Drive Motor: 3 HP, 3 ph or 1½ HP, 1 ph
- Work Height: 26"
- Coolant Capacity: 10 gallons
- Machine Weight: 990 Lbs.
- Machine Dimensions: 43" L x 81" W x 63" H
Click to Request a Quote for the W-9
OPTIONS AVAILABLE:
- Casters
- Automatic Length Stop Assembly
- Discharge Table, 20"W x 48"L (with Length Stop)
- Production Angle Vise (swivels 45°)
- Work Light, Wired In
- Blade Tension Indicator
- Manual Air Vise
- Blade Break/Stall Switch
- Air Holddown
- Stock Stand, 6" or 12" Roller
- Manual Holddown
- Free Standing Roller Stock Conveyors
Dual Column Band Saw model W-10
STANDARD FEATURES:
- Made in USA by WF Wells
- Normally in stock
- Semi-Automatic
- 1" Bi-Metal Blade
- Carbide Guide Blocks
- Manual Vise Operation
- Manually Controlled Blade Tension
- Built-In Coolant System
- Blade Powered, Rotary Cleaning Brush
- TEFC Motors
- Fused Disconnect
- Low Voltage Protection
- Overload Protection
- Automatic End-Of-Cut Shut-Off
- Quick & Easy Blade Speed Change
- Feed Pressure Monitor/Regulator
- Electrical to NFPA-79 Standards
- Safety Guards, Owners Manual
- Hydraulic oil and gear oil included
MACHINE SPECIFICATIONS:
- Capacity at 90°: Rectangular 17" wide x 10" high
- Round 10" Diameter
- Piece Part Weight Capacity: 5000 Lbs
- Blade Speed Range: 60-425 SFPM
- Blade Size: 1" x 11'11"
- Bandwheel Size: 14½"
- Sawing Force: 30-120 Lbs
- Blade Drive: 5 HP, 3 phase
- Hydraulic Drive: 1/3 HP
- Work Height: 26"
- Coolant Capacity: 15 gallons
- Hydraulic Capacity: 3/4 gallon
- Machine Weight: 1400 Lbs
Click to Request a Quote for the W-10
OPTIONS AVAILABLE:
- Hydraulic Vise & Blade Tension (option W10-2).
- Casters
- Automatic Length Stop Assembly
- Discharge Worktable, 20"W x 48"L with Stock Stop
- Miter Vise, 45°
- Manual Air Vise
- Work Light, Wired In
- Blade Break/Stall Switch
- Stock Stand, 6" OR 12" Wide (Heavy Duty)
- High Speed AC Drive (400-3000 SFPM)
- Console Controlled Blade Speed (AC Drive)
- Free Standing Roller Stock Conveyors
2 Post BandSaw model F-16
STANDARD FEATURES:
- Made in USA by WF Wells
- Made in USA by WF Wells
- Normally in stock
- Semi-Automatic
- 1¼" Bi-Metal Blade
- Carbide Guides with Roller Backups
- Manual Vise Operation
- Manually Controlled Blade Tension
- Blade Tension Indicator
- Built-In Coolant System
- Blade Powered, Rotary Cleaning Brush
- TEFC Motors
- Fused Disconnect with Lock Out
- Low Voltage Protection
- Overload Protection
- Automatic End-Of-Cut Shut-Off
- Quick & Easy Blade Speed Change
- Feed Pressure Monitor/Regulator
- Electrical to NFPA-79 Standards
- Safety Guards, Owners Manual
- Hydraulic oil and gear oil included
MACHINE SPECIFICATIONS:
- Capacity at 90°: Rectangular 20" wide x 16" high
- Round 16" Diameter
- Capacity @ 45°: Rectangular 26" wide x 10" high
- Round 10" Diameter
- Piece Part Weight Capacity: 5000 Lbs
- Blade Speed Range: 60-425 SFPM
- Blade Size: 1¼" X .042" X 15'
- Bandwheel Size: 14½"
- Sawing Force: 30-120 Lbs
- Blade Drive: 5 HP, 3 phase
- Hydraulic Drive: 1/3 HP
- Work Height: 26"
- Coolant Capacity: 15 gallons
- Hydraulic Capacity: 3/4 gallon
- Machine Weight: 2100 Lbs
- Machine Size: 49" L x 97" W x 83" H
Click to Request a Quote for the F-16
OPTIONS AVAILABLE:
- Hydraulic Vise & Blade Tension (option F16-2).
- Hydraulic Vise & Blade Tension + 10 HP Invertor Drive + 1½" Blade (option F16-3).
- Casters
- Automatic Length Stop Assembly
- Discharge Worktable, 20"W x 48"L with Stock Stop
- Mitering Vise, 45°
- Manual Air Vise
- Work Light, Wired In
- Blade Break/Stall Switch
- Stock Stand, 6" OR 12" Wide (Heavy Duty)
- High Speed AC Drive (400-3000 SFPM)
- Console Controlled Blade Speed (AC Drive)
- Free Standing Roller Stock Conveyors
Double Column Band Saw model F-1630
STANDARD FEATURES:
- Made in USA by WF Wells
- Semi-Automatic
- 1¼" Bi-Metal Blade
- Carbide Guides with Roller Backups
- Manual Vise swivels 45°
- Manually Controlled Blade Tension
- Blade Tension Indicator
- Built-In Coolant System
- Blade Powered, Rotary Cleaning Brush
- TEFC Motors
- Fused Disconnect with Lock Out
- Automatic End-Of-Cut Shut-Off
- Quick & Easy Blade Speed Change
- Feed Pressure Monitor/Regulator
- Electrical to NFPA-79 Standards
- Safety Guards, Owners Manual
- Hydraulic oil and gear oil included
MACHINE SPECIFICATIONS:
- Capacity at 90°: Rectangular 30" wide x 16" high
- Round 16" Diameter
- Piece Part Weight Capacity: 5000 Lbs
- Blade Speed Range: 60-425 SFPM
- Blade Size: 1¼" X .042" X 16'8"
- Bandwheel Size: 20"
- Sawing Force: 30-120 Lbs
- Blade Drive: 7.5 HP, 3 phase
- Hydraulic Drive: 1/3 HP
- Work Height: 26"
- Coolant Capacity: 15 gallons
- Hydraulic Capacity: 3/4 gallon
- Machine Weight: 2500 Lbs
- Machine Size: 118" L x 52" W x 88" H
Click to Request a Quote for the F-1630
OPTIONS AVAILABLE:
- Hydraulic Swivel Vise (45°) with Variable Pressure with 2 HP hydraulic pump (option F1630-2).
- Automatic Length Stop Assembly
- Discharge Worktable, 20" W x 48" L with Stock Stop
- Production Angle Vise, 45° swivel
- Work Light, Wired In
- Air Vise Manual Air Holddown
- Blade Break/Stall Switch
- Chip Conveyor, Electric
- Hydraulic Clamping Mitering Vise with Swivel Base
- 21" x 10' Powered Conveyor, Electric
- High Speed AC Drive (1" Blade) 400-3000 SFPM
- Console Controlled Blade Speed (AC Drive)
- Free Standing Roller Stock Conveyors
2 Post BandSaw model H-2024
STANDARD FEATURES:
- Made in USA by WF Wells
- Semi-Automatic
- 1¼" Bi-Metal Blade
- Carbide Guides with Roller Backups
- Manual Vise swivels 45°
- Manually Controlled Blade Tension
- Blade Tension Indicator
- Built-In Coolant System
- Blade Powered, Rotary Cleaning Brush
- TEFC Motors
- Fused Disconnect with Lock Out
- Automatic out of stock shutdown
- Quick & Easy Blade Speed Change
- Feed Pressure Monitor/Regulator
- Electrical to NFPA-79 Standards
- Safety Guards, Owners Manual
- Hydraulic oil and gear oil included
MACHINE SPECIFICATIONS:
- Capacity at 90°: Rectangular 24" wide x 20" high
- Round 20" Diameter
- Capacity @ 45°: Rectangular 13" wide x 20" high
- Round 13" Diameter
- Vise: Manual, 15" capacity
- Piece Part Weight Capacity: 5000 Lbs
- Blade Speed Range: 60-500 SFPM
- Bandwheel Size: 20"
- Sawing Force: 30-120 Lbs
- Blade Drive: 7.5 HP, 3 phase
- Hydraulic Drive: 1/3 HP (2 HP optional)
- Work Height: 26"
- Coolant Capacity: 15 gallons
- Hydraulic Capacity: 3/4 gallon
- Machine Weight: 2800 Lbs
- Machine Size: 99" L x 36" W x 84" H
Click to Request a Quote for the H-2024
OPTIONS AVAILABLE:
- 2 HP Hyraulic Drive with Hydraulic Vise & Blade Tension + 10 HP Invertor Drive + 1½" Blade with 750 Lbs sawing force (option H2024-3).
- Automatic Length Stop Assembly
- Discharge Worktable, 20"W x 48"L with Stock Stop
- Manual Air Vise
- Work Light, Wired In
- Blade Break/Stall Switch
- Stock Stand, 6" OR 12" Wide (Heavy Duty)
- High Speed AC Drive (400-3000 SFPM)
- Console Controlled Blade Speed (AC Drive)
- Free Standing Roller Stock Conveyor
- Casters
Twin Post Band Saw model B-25
WF Wells B25-1 base model
WF Wells B25-3 with hydraulic controls
Rear View of B25-3C with hydraulics and 6° Cant
STANDARD FEATURES:
- Made in USA by WF Wells
- Semi-Automatic
- 1¼" Bi-Metal Blade
- AC Vector Drive
- Carbide Guides with Roller Backups
- Hydraulically controlled Vise
- Hydraulically controlled Blade Tension
- Vise swivels 45°
- Blade Tension Indicator
- Built-In Coolant System
- Blade Powered, Rotary Cleaning Brush
- TEFC Motors
- Fused Disconnect with Lock Out
- Automatic out of stock shutdown
- Console Controlled Blade Speed
- Feed Pressure Monitor/Regulator
- Low Voltage/Overload Protection
- Electronic Door Safety Interlocks
- Work Lights
- Safety Guards, Owners Manual
- Hydraulic oil and gear oil included
MACHINE SPECIFICATIONS:
- Capacity at 90°: Rectangular 40" wide x 25" high
- Round 25" Diameter
- Capacity @ 45°: Rectangular 24" wide x 25" high
- Round 24" Diameter
- Vise: Manual, 15" capacity
- Piece Part Weight Capacity: 15000 Lbs
- Blade Speed Range: 60-500 SFPM
- Blade Size: 1¼” X .042" X 22' 6"
- Bandwheel Size: 26"
- Sawing Force: 0 to 750 Lbs
- Blade Drive: 7.5 HP, 3 phase, AC Vector Drive
- Hydraulic System: 2 HP
- Work Height: 28"
- Outfeed Table: 24" x 40"
- Coolant Capacity: 15 gallons
- Hydraulic Capacity: 20 gallons
- Machine Weight: 5800 Lbs
Click to Request a Quote for the B-25
OPTIONS AVAILABLE:
- 1½" Bi-Metal Blade (option B25-2)
- 1½" Bi-Metal Blade + 6° Cant (option B25-2C)
- 2" Bi-Metal Blade + Hydraulic Positioned Guide Arm (option B25-3)
- 2" Bi-Metal Blade + 6° Cant + Hydraulic Positioned Guide Arm (option B25-3C).
- 2-5/8" Bi-Metal Blade + Hydraulic Auger Style Chip Conveyor + Hydraulic Powered Blade Brush + Hydraulic Positioned Guide Arm + LED Positive Feed Readout (option B25-4)
- Large Discharge Worktable, 40" W x 56" L with Stock Stop
- Hydraulic Chip Conveyor
- Blade Break/Stall Switch
- Non-Powered Conveyor
- Hydraulic Powered Conveyor
- High Speed Drive & Guides 500-3000 SFPM
Double Column BandSaw model S-40
WF Wells S-40-3 front view
WF Wells S-40-3 rear view
STANDARD FEATURES:
- Made in USA by WF Wells
- Semi-Automatic
- 2" Bi-Metal Blade
- AC Vector Drive
- Spring Loaded Carbide Guides
- Hydraulic Vise w/ Variable Pressure
- Hydraulic Blade Tension
- Hydraulic Guide Arm Positioning
- Blade Tension Indicator
- Blade Break/Stall Switch
- Built-In Coolant System
- Hydraulic Powered Blade Brush
- TEFC Motors
- Fused Disconnect
- Automatic End-Of-Cut Shut off
- Console Controlled Blade Speed
- Feed Pressure Monitor/Regulator
- Low Voltage/Overload Protection
- Electronic Door Safety Interlocks
- Work Lights
- Safety Guards, Owners Manual
MACHINE SPECIFICATIONS:
- Capacity at 90°: Rectangular 40" wide x 40" high
- Round 40" Diameter (1 meter)
- Capacity @ 45°: Rectangular 24" wide x 40" high
- Round 24" Diameter
- Piece Part Weight Capacity: 15000 Lbs
- Blade Speed Range: 115-500 SFPM
- Blade Size: 2" x .063" x 29'
- Bandwheel Size: 42"
- Sawing Force: 0-500 Lbs
- Vise: Hydraulic, 24" capacity
- Blade Drive: 15 HP, 3 phase AC Vector Drive
- Hydraulic Drive: 5 HP
- Work Height: 28"
- Coolant Capacity: 15 gallons
- Hydraulic Capacity: 3/4 gallon
- Machine Weight: 9200 Lbs
Click to Request a Quote for the S-40
OPTIONS AVAILABLE:
- 2" Bi-Metal Blade at 6° Cant + 24" x 40" Outfeed Table (option S40-3C)
- 2-5/8" Bi-Metal Blade with 1000 Lbs saw force (option S40-4)
- Discharge Worktable, 40" W x 56" L
- Hydraulic Chip Conveyor, Auger Style
- Hydraulic Holddown, Saw Vise
- Outboard Vise with Hydraulic Holddown
- Outboard Vise
- High Speed Drive & Guides (1½" Blade) 570-3400 SFPM
- Hydraulic Powered Conveyor, 36" x 10'
- Non-Powered Conveyor 36" x 5'
- Non-Powered Conveyor 36" x 10'
- 40" wide Conveyors
2 Post Band Saw model P-50
STANDARD SPECIFICATIONS:
- Made in USA by WF Wells
- Capacity Rectangular @ 90°: 50" H x 50" W
- Weight Capacity: 15,000 lbs
- Blade Speed: 60-500 SFPM
- Blade Size: 2" x .063" x 37'-8"
- Blade Guide Carbide Blocks, Spring Tensioned
- Blade Tension Hydraulic, Console Controlled
- Sawing Force Variable: 0-1000 Lbs
- Vise: Hydraulic Full Stroke
- Hydraulic System: 20 Gallon Capacity, 5 HP Motor
- Coolant System: 60 Gallon Capacity, 10 GPM Pump
- Work Height: 26"
- Shipping Weight: 21,500 lbs
- Electrics: Wired to NFPA 79 Machine Tool Standards
- Machine Dimensions: 24' L x 60" W x 13'6" H
- LED Blade Speed Indicator
- Hydraulic Guide Arm Positioning
- Blade Break/Stall Switch
- Hydraulic Powered Blade Brush
Click to Request a Quote for the S-50
OPTIONS ACCESSORIES:
- Discharge Worktable, 50" W x 48" L
- Discharge Worktable, 50" W x 96" L
- Hydraulic Holddown, Saw Vise
- High Speed Drive, Roller Guides
- Hydraulic Chip Conveyor
- Option S50-4 comes with 2-5/8" Bi-Metal Blade + LED Positive Feed Readout + Chip Conveyor and also comes with Positive Frame Feed, which allows the head to descend at a fixed rate (inches per minute) for optimum cutting of those high production applications where similar types of material are cut repetitively. Hydraulic down pressure moves the blade through tough materials at a constant rate.
Baileigh imported Double Column Band Saw Machines
Baileigh BS-360SA Dual Column Band Saw
Need an accurate horizontal bandsaw to call a lot of steel? The BS-360SA semi-automatic band saw is heavy duty and has a big 14” x 22” rectangle cutting capacity. The dual column design keeps the blade tracking straight. Built with high quality components, the BS-360SA has a full cast iron vise and bow that are machined to tight tolerances to ensure that the cuts are exact. The blade guides are fully sealed ball bearings to ensure proper tracking of the blade.
Powered by a 5 Hp motor that drives the blade and hydraulic system. Using this saw is easy to use because of a well labeled control panel allowing the operator to understand it quickly. The semi-automatic system has controls to open and close the vise and to hydraulically raise and lower the saw head. Other nice features are a hydraulic blade tension control with a blade brake switch, a flood coolant system, work light, and a chip removal blade brush. Made in Taiwan.
MACHINE SPECIFICATIONS:
- Capacity Round: 14"
- Capacity Square: 14"
- Capacity Rectangle: 14" x 22"
- Return: Hydraulic
- Table Height: 29.21"
- Blade Speed: 66 – 279 fpm variable
- Blade Guide: Hydraulic
- Blade Size: 1.3" wide x .04" thick x 192.13" long
- Descent Control: Pressure Assist Hydraulic
- Motor: 5 HP
- Drive: Inverter variable speed
- Power: 220 Volts, 3 phase
- Shipping Weight: 3,100 lbs.
Baileigh BS-700SA Double Column Bandsaw
The BS-700SA dual column type bandsaw is designed for cutting large stock all day long. It has 27.5 inch diameter round cutting capacity. The double column design keeps the blade tracking straight. This machine comes with many features including a unique hydraulic carbide guide system, a powered chip brush for longer blade life, and an automatic chip removal device as well. A variable speed inverter drive is also standard. Since feeding large stock can be difficult, the Baileigh bandsaw also includes a 80 inch long roller table that has a rack and pinion conveyor to help move heavy stock material. Made in Taiwan.
MACHINE SPECIFICATIONS:
- Capacity Round: 27.5"
- Capacity Square: 27.5"
- Return: Hydraulic
- Motor: 10 HP
- Table Height: 26.75"
- Blade Guide: Hydraulic
- Carbide Blade Size: 2.125" wide x .063" thick x 283.465" Long
- Drive: Inverter variable speed
- Power: 220 Volts, 3 phase
- Shipping Weight: 9,000 lbs.
Baileigh BS-800SA Dual Column BandSaw
The BS-800SA is a semi-automatic band saw that features a unique hydraulic carbide guide system, a powered chip brush for longer blade life, and an automatic chip removal device as well. An inverter driven variable speed system is standard. The 31.5” round cutting capacity gives this machine the ability to cut large stock all day long without quitting. Feeding the material into the saw is easy with the 80" long roller table that is a standard feature on the BS-800SA. The dual column design keeps the blade tracking straight which is important for cutting large pieces. Made in Taiwan.
MACHINE SPECIFICATIONS:
- Capacity Round: 31.5"
- Capacity Square: 31"
- Return: Hydraulic
- Motor: 10 HP
- Blade Guide: Hydraulic
- Blade Size:2.125" wide x .063" thick x 326.77" Long
- Drive: Inverter variable speed
- Power: 220 Volts, 3 phase
- Shipping Weight: 9,500 Lbs.