JET J3410 HORIZONTAL BANDSAW
Click to Request a Quote for the Jet J3410
- Adjustable hydraulic feed system
- Automatic shut-off at end of cut
- Coolant pump, tank, motor, hose, nozzle, shut-off valve
- Side blade guides with eccentric shaft, ball bearing
- Rear blade guides ball bearings
- Heat treated drive gear with bronze worm gear in oil bath
- Heavy-duty cast iron saw head and table
- Oil bath hardened and ground worm gear
- Adjustable ball bearing blade guides
- Blade wheels are made of flanged cast iron
- Rapid acting swivel vise for mitering at 45°
- Saw base has wheels
- 3/4" bi-metal blade
- Adjustable material stop
- * Cutting Capacity: 7" Round at 90°
- * Round at 45 Degrees: 4-1/2" diameter
- * Square at 90 Degrees: 7 inches
- * Rectangle at 90 Degrees: 2 x 12" or 7 x 10.5 inches
- * Blade Size: 3/4 x .035 x 93 inches
- * Blade Speeds: 80, 130, 180, 265 feet per minute
- * Bed Height: 23-1/2 inches
- * Machine Weight: 380 Lbs.
- * Motor: 3/4 HP, 115 Volts, 1 phase, only
JET HBS-814GS Geared Head HORIZONTAL BAND SAW
Click to Request a Quote for the Jet HBS-814GS
- Heavy duty geared head transmission fast speed changes
- Easy accessible control panel for operator use
- Hydraulic controlled down feed rate
- Portable on wheels
- Hardened and ground worm gears
- Quick action swivel vise miters at 45°
- Coolant system
- 3/4" Carbon steel blade with chip brush
- Adjustable material stop
- * Cutting Capacity: 8" Round at 90 Degrees
- * Round at 45 Degrees: 6-1/2 inches
- * Square at 90 Degrees: 8 inches
- * Rectangle at 90 Degrees: 8 X 14 inches
- * Rectangle at 45: 2 x 7 inches
- * Blade Size: 3/4 x .035 x 97 inches
- * Blade Speeds: 135, 197, 256 feet per minute
- * Bed Height: 26 inches
- * Machine Weight: 444 Lbs.
- * Motor 1 HP, 115/230V, 1 phase, Prewired 115Volts
JET J9225 8-3/4" ZIP MITER HORIZONTAL BANDSAW
Click to Request a Quote for the Jet J9225
- Adjustable hydraulic feed system
- Heavy duty cast iron saw head and sturdy base
- Mitering capability to 60°
- Convenient control panel
- Complete coolant system
- Hydraulic blade tension gauge
- Adjustable material stop
- Bi-Metal bendsaw blade
- Overload protection
- Quick Release Vise
- * Cutting Capacity: 8-3/4" Round at 90°
- * Round at 45 Degrees: 6-1/4" diameter
- * Rectangle at 90 Degrees: 8-3/4 x 7 inches
- * Square at 90 Degrees: 8-3/4 inches
- * Blade Size: 1 x .035 x 96.5 inches
- * Blade Speeds: 157, 314 feet per minute
- * Bed Height: 38-7/16 inches
- * Machine Weight: 542 Lbs.
- * Motor 1.5 HP, 230 Volts, 3 phase only
JET J7020 10 x 16 HORIZONTAL BAND SAW
- Optional Swivel Head Available:
- for easy miter cutting.
- Optional Motor Available:
- 2 HP, 460 Volts, 3 phase
Click to Request a Quote for the Jet J7020
- Variable speed drive with easy fine adjustment
- Exclusive 6 contact point blade guide assemblies
- Exclusive swivel control panel
- One piece wheel cover
- Heavy duty transmission hardened&ground oil bath gears
- Adjustable blade guides with 6 point contact combination
- Swing away control panel
- Patented 3 jaw rapid action swivel vise
- Cast iron blade wheels
- Adjustable material stop
- * Cutting Capacity: 10" Round at 90 Degrees
- * Round at 45 Degrees: 10 inches
- * Square at 90 Degrees: 10 x 10"
- * Rectangle at 90 Degrees: 7 X 16"
- * Rectangle at 45: 6-1/2 x 11"
- * Blade Size: 1 X .035 X 135 inches
- * Variable Blade Speeds: 100 - 350 feet per minute
- * Bed Height: 23-1/2 inches
- * Machine Weight: 1000 Lbs.
- * Motor: 1.5 HP, 115/230V, 1 phase, Prewired 230Volts
JET HBS-1018W 10 x 18 HORIZONTAL BANDSAW
Click to Request a Quote for the Jet HBS-1018W
- Large handwheel and built-in gauge for blade tensioning
- Coolant is distributed through the blade guides
- Blade guides with parallel double-row ball bearing support
- Blade brush is built-in and self-propelled
- Quick-position vise with adjustable jaws swivels to 45°
- Removable chip tray for quick clean-up
- Blade is fully guarded regardless of blade guide position
- Adjustable hydraulic downfeed with separate on/off valve
- Automatic shut-off after cut
- Carbide blade guides with rollers
- Coolant system
- 4/6 variable tooth bi-metal saw blade
- Adjustable material stop
- * Cutting Capacity: 10" Round at 90 Degrees
- * Round at 45 degrees: 7.5 inches
- * Square at 90 degrees: 10 x 10 inches
- * Rectangle at 90 degrees: 10 X 16" or 6 x 18"
- * Rectangle at 45: 7-1/2 x 10"
- * Blade Size: 1 X .035 X 130.5 inches
- * Blade Speeds: 82, 132, 210, 330 feet per minute
- * Bed Height: 23-1/2 inches
- * Machine Weight: 801 Lbs.
- * Motor: 2 HP, 230 Volts only, 1 phase
JET J7060 12 x 20 LARGE HORIZONTAL BAND SAW
Click to Request a Quote for the Jet J7060
- Variable speed drive system allows the operator to fine tune the blade speed fast and easily
- Exclusive swivel control panel
- Heavy duty transmission utilizes hardened and ground gears operating in an oil bath
- Balanced feed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
- Saw head raised hydraulically after each cut
- Cast iron band wheels
- Swing away control panel
- Exclusively patented 3 jaw vise allows for faster set up
- Exclusive 6 contact point adjustable blade guides (eccentric cam followers mounted on both sides of blade)
- Quick action swivel vise miters at 45°
- Coolant system
- Adjustable material stop
- * Cutting Capacity: 12" Round at 90 Degrees
- * Round at 45 degrees: 12 inches
- * Square at 90 degrees: 12 x 12 inches
- * Rectangle at 90 degrees: 12 x 20"
- * Rectangle at 45: 12 x 12"
- * Blade Size: 1 X .035 X 156 inches
- * Variable Blade Speeds: 82 - 262 feet per minute
- * Bed Height: 26-1/4 inches
- * Machine Weight: 1500 Lbs.
- * Motor: 3 HP, 230/460V, 3 phase, Prewired 230Volts
JET HBS-1321W 13 x 21 EXTRA LARGE BANDSAW
Click to Request a Quote for the Jet HBS-1321W
- Semi-automatic bow raises after cut is complete to predetermined height
- Adjustable rate hydraulic downfeed control
- Variable blade speed allows optimum cutting performance
- Safety switch shuts off motor if band breaks
- Quick-positioning vise lessens set-up time
- Large handwheel and built-in gauge for blade tensioning
- Coolant is distributed through the blade guides
- Cleaning hose and nozzle assist in washing chips away
- Easy access chip tray allows quick cleanup
- Self-propelled blade brush extends the blade life
- Automatic shut-off after cut
- Carbide blade guides with rollers
- Coolant system
- 3/4 variable tooth bi-metal blade
- Adjustable material stop
- * Cutting Capacity: 13" Round at 90 Degrees
- * Round at 45 degrees: 10 inches
- * Rectangle at 90 degrees: 13 x 18"
- * Blade Size: 1-1/4 x .042 x 161-1/2 inches
- * Variable Blade Speeds: 66 - 264 feet per minute
- * Bed Height: 32 inches
- * Machine Weight: 1519 Lbs.
- * Motor: 3 HP, 230/460 Volts, 3 phase, Prewired 230V