Options:
- Wet Process instead of Dry
- Wet Dust Collector
- Heavy Duty Ducting
- Inverter Drive -CC
Features:
- Motorized Table Lift, with digital readout
- Variable Speed Conveyor
- Conveyor Forward & Reverse
- Belt Safety Overtravel Switches
- Electronic Eye Belt Tracking. Belt tracking adjusting lever (Belt Trimmer) to re-adjust the tracking system when running extremely out of parallel belts
- 4-Jackscrew Table Support
- Double Infeed & Outfeed Pinch Rolls with protective guards
- Conveyor Belt Tracking System
- Safety System with Disc Brake. Air operated disc brakes to stop sanding head in 3-5 seconds in the even of loss of air pressure or activation of any emergency stop device
- Table Height Digital Readout
- Load Meter indicates percentage of full motor loads
- Belt change door electrically interlocked for safety purpose
- Air tensioning of belt for accurate tensioning & compensation of belt stretch
- Quick release sanding head support for fast belt change
- Dust collection hood with 4" outlet is located adjacent to abrasive head in sanding area
- Emergency stops from almost any point
- Noise below 80 dba
CAUTION: Hazardous materials, such as aluminum, titanium, magnesium, etc., should be processed with a dust collection system that conforms to National Fire Protection Association.
| Model | FP-1460 | FP-2560 | FP-4075 | FP-5285 |
| Specifications | Click to Request this Quote | Click to Request this Quote | Click to Request this Quote | Click to Request this Quote |
| Max. Part Width | 12-1/2" | 24" | 40" | 52" |
| Abrasive Belt Size | 14 x 60" | 25" x 60" | 40.5 x 75" | 52 x 85" |
| Contact Roller Size | 8" Diameter | 8" Diameter | 8" Diameter | 8" Diameter |
| Passline Height | 34 - 37" | 34 - 37" | 34 - 37" | 34 - 37" |
| Max. Thickness Capacity | 3-1/8" | 3-1/8" | 3-1/8" | 3-1/8" |
| Conveyor Drive Speed | 6 - 30 FPM | 8 - 40 FPM | 8 - 40 FPM | 8 - 40 FPM |
| Infeed Conveyor Length | 20" | 20" | 20" | 20" |
| Optional Dust Collector Capacity | 1000 CFM | 1100 CFM | 1800 CFM | 2800 CFM |
| Main Motor | 7.5 HP | 10 HP | 15 HP | 30 HP |
| Conveyor Motor | 1 HP | 1 HP | 1.5 HP | 3 HP |
| Table Lift Motor | 1/4 HP | 1 HP | 1 HP | 3 HP |
| Electrical Requirement | 35Amp@230/3/60 | 45Amp@230/3/60 | 60Amp@230/3/60 | 120Amp@230/3/60 |
| Compress Air needed | 2 CFM @ 90 PSI | 2 CFM @ 90 PSI | 2 CFM @ 90 PSI | 2 CFM @ 90 PSI |
| Machine Weight | 1,850 Lbs | 2,950 Lbs | 4,650 Lbs | 6,650 Lbs |
| Machine Size L x W x H | 49 x 35 x 69" | 55 x 63 x 69" | 76 x 88 x 81" | 89 x 98 x 93" |